VDO Pa-tube sensor 600 mm reed-contact 0-18 ohm

Description

All In One meter for engine and other data display (NMEA) Ø 52 mm
The VL Flex meter can be easily configured with the required/available engine and other data. Round TFT display in a standard size Ø 52 mm meter housing.

Customizable inputs 1 for resistive sensor, 1 for pulse frequency, 1 for NMEA2000 line. The display can show max. 2 instrument data at a time.
The supported analogue inputs allow you to read data directly from the engine sensors and the NMEA 2000® interface extends this possibility to read data from the digital network.
The simple but effective graphic design can be set to single or dual display, allowing data to be presented in a clear and intuitive format.

Customizable functions NMEA 2000® PGN (depending on installed sensors and engine model specific bus characteristics).

• rpm
• boat speed in pulses
• boat speed relative to ground SOG
• amperage meter
• voltmeter
• battery charge level
• battery temperature
• battery usage h/day
• engine hours
• speed relative to bottom
• course relative to bottom
• speed
• clock
• fuel level
• gross water level
• septic tank level
• trim position
• tailplane angle
• coolant temperature
• foam pressure
• oil pressure
• oil temperature
• gear oil pressure
• gear oil temperature

1. Voltage 12 / 24 V
2. Operating voltage 9 - 32 V
3. Power consumption: 50 mA
5. Closure class: IP 67
6. Dimensions: 60 mm (bezel) 52 mm (mounting hole)
7. Display: 1.44" TFT display
8. Resolution: 125 x 125 pixels
9. Analog interface: 1x resistive/1x pulse frequency
10. Connector: Tyco / Hirschmann MQS connector 8 pin
11. Digital ports: NMEA 2000®, LIN bus
    
    

For more information see Veratào's website