P110S Nivelyksikkö (noin 80 – 140 hp) Python Drive
1 286,58 €
P80S Pythondrive flexible and vibration-free drive unit
Made to order / Backorder, delivery estimate 2-5 days
Description
Python-Drive P110S wetbar for boat.
Several different shaft sizes and adaptors depending on the gear model.
When using a hub unit, precise alignment of the shaft is not necessary and the propeller shaft system can be mounted at different angles, in the optimum position in relation to the engine. Rubber pads in the thrust bearing effectively dampen vibrations from the propeller shaft, while reducing resonance from the shaft assembly to the boat hull. The hub unit; also protects the gearbox from axial loads.
The thrust bearing of the thrust unit is attached to a mounting plate/flanges (not supplied with the thrust unit) securely mounted on the hull of the boat, the propeller shaft is attached to the thrust bearing with a compression fitting, using a friction clamping sleeve. An adapter flange, selected according to the marine gear, is supplied with the linkage to attach the joint to the marine gear.
A complete package is delivered including:
- the pressure bearing unit
- constant velocity joints
- an adapter flange suitable for marine gear
- rubber kit for mounting on bulkhead
Remember to choose the diameter of the propeller shaft and the appropriate fitting according to the output flange of the marine gear. The constant velocity joint is the same for all standard P30R models.
Python-Drive constant velocity joints are also available on request with a specially dimensioned joint shaft, which allows the joint to be mounted in the appropriate position according to the boat's space and engine location.
| Joint suitability e.g. | 135 hp/2800 rpm, 3:1 gear ratio |
|---|---|
| Maximum thrust | 12 kN |
| Torque (maximum) | 110 kgm/ 1080 Nm |
English 
Finnish 
Swedish