22AM4 R&D Drive Plate Ø 155,4 mm
198,00 €
R&D Marine Damper plate between engine and gearbox
Made to order / Backorder, delivery estimate 2-5 days
Description
Damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design and maintain the drive if the flexible element fails. Damper Drive plate is fitted between the boat engine and the gearbox input shaft. R&D Marine has developed a wide range of competitively priced Damper Drive Plates to fit most engine/gearbox combinations. The R&D Damper Drive Plate reduce gear noise and allow the engine to run at lower speeds. Linear Stiffness elements for general applications and High-Deflection elements to stop gear noise and spline wear at slow speeds. The flexible elements are made from a Polyester Elastomer which has good heat qualities and is not affected by salt water, diesel and lubrication oils. Installation is made quick and easy as the R&D Damper Drive Plate requires no machining and is ready to bolt to the flywheel.| Hub spinline | 10T B10 x 23 x 29 DIN 5464 |
|---|---|
| Suitable for e.g. gear | HBW 100, HBW 125, HBW 150, HBW 35, HBW 40, HBW 50, PRM 120, PRM 150, PRM 60, PRM 80, PRM 90, TMC40, TMC60, TMC60A |
| Flywheel mounting fixing bolts Ø (mm) | 5 x Ø 6,35 mm - Ø 142 mm |
| Plate diameter Ø (mm) | Ø 155, 45 mm |
| Traction plate thickness (mm) | 32 |
| Torque (maximum) | 135 Nm |
English 
Finnish 
Swedish