16 M3 Drive Plate
318,00 €
R&D Marine Damper plate between engine and gearbox
In stock, delivery estimate 1-3 days
Description
Damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design and maintain the drive if the flexible element fails. Damper Drive plate is fitted between the boat engine and the gearbox input shaft. R&D Marine has developed a wide range of competitively priced Damper Drive Plates to fit most engine/gearbox combinations. The R&D Damper Drive Plate reduce gear noise and allow the engine to run at lower speeds. Linear Stiffness elements for general applications and High-Deflection elements to stop gear noise and spline wear at slow speeds. The flexible elements are made from a Polyester Elastomer which has good heat qualities and is not affected by salt water, diesel and lubrication oils. Installation is made quick and easy as the R&D Damper Drive Plate requires no machining and is ready to bolt to the flywheel.| Hub spinline | 1 1/8" x 10 SAE Ø 28,5 mm |
|---|---|
| Flywheel mounting fixing bolts Ø (mm) | 6 x Ø 8,1 mm - Ø 200 mm, 6 x Ø 8,1 mm - Ø 210 mm, 6 x Ø 8,1 mm - Ø 263 mm, 6 x Ø 8,1 mm - Ø 269,9 mm, 6 x Ø 8,1 mm - Ø 276,3 mm, 6 x Ø 8,1 mm - Ø 289 mm, 6 x Ø 8,1 mm - Ø 295,3 mm, 6 x Ø 8,1 mm - Ø 304,8 mm, 6 x Ø 8,1 mm - Ø 314,4 mm, 6 x Ø 8,1 mm - Ø 320,7 mm |
| Plate diameter Ø (mm) | 336,5 mm |
| Traction plate thickness (mm) | 35 |
English 
Finnish 
Swedish